Discontinued
Model: x554unv-tmx9p
Contact us for pricing and availability. Availability is limited and is not guaranteed.
NEC's complete 55" 3x3 LCD TileMatrix™ Digital Video Wall Solution delivers an all-in-one, easy-to-configure and cost-effective solution that is ideal for dynamic digital signage, information display and command & control applications. Exclusive TileMatrix and TileComp™ technologies, combined with the ultra-narrow bezel design of the NEC X554UNV and the full adjustment capabilities of the Peerless DS-VW765-LAND mount, provide for a near seamless video wall without the need for additional third-party equipment.
  • Bundled solution with everything required for a 3x3 video wall makes configuration and installation easy
  • Pull-out mount allows for full-service capabilities and 6-axis adjustment for perfect alignment
  • Direct LED backlighting technology improves power consumption and uniformity
  • Display wall calibration kit, Overframe Bezel Kit, cabling and null modem cabling complete the solution
  • Overnight onsite exchange warranty ensures minimum downtime for maximum impact
  • Auto ID feature reduces install time in the single press of a button
  • Expanded daisy chain options with DP1.2 enables 4K resolution across entire wall
  • OPS Slot for internal media player or PC compatibility
  • Near field communication capabilities for setup and service
  • NaViSet Administrator 2: Free software solution that greatly eases administration and management of larger display device installations
  • Video daisy chain limitations apply when High-bandwidth Digital Content Protection (HDCP) is utilized



Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Display

Panel Technology SPVA (P-DID) Viewable Image Size 55 "
Aspect Ratio 16:9 Native Resolution 1920x1080
Pixel Pitch 0.63 mm Pixels Per Inch 47 @ native resolution
Backlight Type LED Direct-lit Brightness (typical) 350 cd/m2
Brightness (maximum) 500 cd/m2 Contrast Ratio (typical) 4000:1
Viewing Angle (typical) 178° Vert., 178° Hor. (89U/89D/89L/89R) @ CR>10 Response Time (Gray to Gray) 8 ms
Refresh Rate 60Hz Active Screen Area 1209.6 x 680.4mm / 47.6 x 26.8 in.
Orientation Landscape/Portrait Displayable Colors More than 16.7 million

Synchronization Range

Horizontal (Analog/Digital) 31.5-91.1 kHz  

Input Signal

Video Analog RGB 0.7 Vp-p/75 Ohms Sync Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)

Signal Compatibility/Connectivity

PC Signal Compatibility Yes Macintosh Signal Compatibility Yes
Video Analog RGB 0.7 Vp-p/75 Ohms Sync Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)
Input Terminals
Analog:
VGA 15-pin D-sub
Digital:
DisplayPort, HDMI, DVI-D
Audio:
Audio Mini-Jack, DisplayPort Audio, HDMI Audio
External Control:
RS-232C, LAN, DDC/CI
Output Terminals
Digital:
DisplayPort
Audio:
Audio Mini-Jack, External Speaker Jack (2)
External Control:
LAN

Power Consumption (typical)

On 125W ECO Mode Standby <0.5W

Physical Specifications

Dimensions (WxHxD)
With stand:
47.8 x 28.7 x 15.7 in. / 1213.5 x 709.3 x 400.0mm
Without stand:
47.8 x 26.9 x 4 in. / 1213.5 x 684.3 x 100.4 mm
Shipping:
57.4 x 34.6 x 12.6 in. / 1459.0 x 880.0 x 320.0mm
Weight
Net Weight (with stand):
62.0lbs / 28.1kg
Net Weight (without stand):
57.1 lbs. / 25.9 kg.
Shipping:
81.6lbs / 37.0kg
VESA Hole Configuration 400 x 400mm (4-hole)  

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Operating Humidity 20-80%
Operating Altitude 13,780 ft. / 4200m Storage Temperature -4-140°F / -20-60°C
Storage Humidity 10-90% Storage Altitude 40,000 ft. / 12,192m

Limited Warranty (parts & labor)

3 Years Onsite Service for displays  

Additional Features

  • Direct LED Backlighting
  • Advanced thermal capabilities
  • Ethernet Control and Communication
  • RS-232 Control and Communication
  • Landscape/portrait capable
  • Carbon footprint meter
  • Plug and Play (DDC/CI, DDC2B)
  • Scheduler (w/ real-time clock)
  • >
  • Screen saver function
  • Ambient light sensor (AmbiBright)
  • Screen saver function
  • Optional human sensor
  • Intelligent Wireless Data (Near Field Communications)
  • Second expansion slot
  • Expanded daisy chain (DP 1.2)
  • 6-axis color adjustment
  • Metal rear cabinet
  • POP
  • Side-by-Side
  • Handles
  • Variable picture modes
  • Advanced video settings (Noise Reduction, Adaptive Contrast)
  • Input labeling
  • Backlight adjust
  • Aspect ratio control
  • Built-in speakers
  • LED edge-lit backlighting
  • OPS/Expansion slot
 

Auto Tile Matrix
A set up feature that will save a tremendous amount of time and cost at set up. Auto tile matrix does and auto set up of video wall via DP and LAN daisy chain. Just run auto ID on the first display, choose the number of horizontal and vertical displays, press “SET”
Round-The-Clock Scheduler
Allows for advanced scheduling of monitor powering up/down, increasing panel lifetime, reducing power consumption and saving the time and expense of finding and purchasing a third-party scheduling solution.
Improved daisy chain
New P series supports video daisy chaining up to 100 pieces via DisplayPort loop through capabilities. LAN, IR and RS232 can be looped simultaneously via LAN. Fewer cables mean less cost and shorter install times thereby reducing cost overall
Interface Extension Slot
A second expansion slot designed to add and customize analog and digital connectivity. This second slot in combination with the OPS expansion slot offer almost unlimited connectivity and player combinations
Advanced Cooling System
Prevents the likeliness of image retention and improves color uniformity.
Input Switching Speed
Multiple settings for input switching speed. Select among “normal, quick or super” settings. If multiple sources are used and visible waiting times with black screens would impact viewing, the fast input switching can be convenient and avoid distraction

Landscape/Portrait Capable
Allows for distortion-free display of content in various orientations, creating new application opportunities.
LED Backlight
Provides for industry-leading low power consumption and less hazardous materials.
Near Field Communications
Reduce installation and servicing costs with the on-board near field communication (NFC) sensor. Use a smart phone with NFC capabilities to preconfigure the display. Configure displays once in the app and then just copy the settings to all displays in the install before they go up. For service, this app can be used to read relevant information such as serial numbers and a log files which can be emailed and analyzed. This makes failure reporting more convenient and less expensive
1080p native resolution (1920x1080)
High resolution provides detailed display of text, graphics and images. HD video is displayed in 16:9 wide aspect ratio.
Human Sensor Accessory
The human sensor accessory helps deliver creative digital signage to end users by allowing for dynamic control of brightness, audio and source inputs while saving operating costs. It also ensures digital signage is on and directed at a targeted audience

Open Pluggable Specification (OPS)
The first industry-wide standardization in option slots that allows for easier installation, use and maintenance of digital signage
TileMatrix™
Allows users to customize a video wall configuration using advanced On Screen Display controls.

Large Screen Display Misc

MultiPresenter Stick

  • Power cord
  • 1.8m DP cable
  • LAN cable
  • Batteries
  • CD-ROM (user manual)
  • Option board slot cover
  • Screws
  • Thumbscrews
Contact Sales Contact Support