New
Model: as32s-p605ul
Contact Us or call for pricing: 866.771.0266
ActiveScene™ using Vela™ film enhances the appearance of interior spaces and provides privacy when needed. ActiveScene™ is adaptable to windows of any dimension, transforming transparent windows to advertising display screens, alerting customers and onlookers about promotions, flash sales, and new products. The ActiveScene™ solution offers a large display canvas without bezels to distract from the image. The many installation options deliver the flexibility to adapt to most locations.
  • Stunning rear projection solution designed to transform standard glass into new creative marketing messages
  • Ideal for new applications such as digital signage, branding and privacy
  • Designed for spaces requiring up to 48 sq/ft of image.



Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Display

Aspect Ratio 16X10 Native Resolution WUXGA 1920x1200
Maximum Resolution Up to 4K@30Hz (3840x2160) with Advanced AccuBlend Contrast Ratio (typical) 600,000:1 with Light Adjust

Synchronization Range

Horizontal (Analog/Digital) 15 to 100KHz (RGB: 24kHz or over) Vertical 50-120 Hz

Signal Compatibility/Connectivity

Supported Video Standards NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL-60/SECAM SD/HD Video Signal Compatibility 4K, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
PC Signal Compatibility VGA, SVGA, XGA, WXGA, Quad-VGA, SXGA, SXGA+, WXGA+, WXGA++, WSXGA+, WUXGA Macintosh Signal Compatibility Yes
External Control RS-232 (D-Sub 9pin), IR, RJ45 Input Terminals
RGB1(analog):
VGA 15-pin D-sub
RGB1(digital):
HDMI w/ HDCP (v1.4)
RGB2(digital):
HDMI w/ HDCP (v1.4)
RGB3(digital):
HDBaseT
Audio 1:
Stereo Mini Jack
Output Terminals
Audio:
Stero Mini Jack
External Control:
RS-232 (D-Sub 9pin), IR, RJ45
Audio Out:
Stereo Mini Jack (variable)
 

Power Consumption (typical)

On 367W / 261W / 1.4W / 0.13W Input Current 5.5A - 2.3A
Power Requirements 100-240V AC, 50/60 Hz  

Physical Specifications

Dimensions (WxHxD)
Product:
18.9 x 16.0 x 5.6 in. (480 x 407 x 142.5 mm)
Shipping:
23.3 x 19.3 x 10.2 in. (591 x 491 x 259 mm)
Weight
Net Weight:
21.4 lbs. (9.7 kg)
Shipping:
28.2 lbs. (12.8 kg)

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Storage Temperature 14° – 122°F / -10° – 50°C
Storage Humidity 20 to 80% Humidity (Non-Condensing)  

Limited Warranty (parts & labor)

Registered owners receive a 5-year or 20,000 hours parts and labor warranty including InstaCare 3-Business Day Repair & Return.  

Additional Features

  • 4K Ready
  • Manual keystone correction
  • Wireless LAN
  • USB Viewer
  • Auto power on
  • ECO Mode technology
  • Variable audio out
  • Carbon savings meter
  • Virtual Remote
  • Picture-in-Picture
  • Built-in wall color correction
  • Advanced AccuBlend
  • AutoSense
 

Optical

Light Output(Lumens) 6,000 Lumens Lamp Type Laser/Phosphor
Light Source Life 20,000 hours Screen Size (diagonal) (4' x 8') or (8' x 4')
Throw Ratio 1.23 - 2.0:1 Projection Distance 2.6 - 44.3 ft. / 0.8 - 13.5m
Projector Angle 0 - 10.8° tele / 0 - 17.0° wide Lens
Zoom:
1.6x
Focus:
Manual
F number, fnumber:
F=1.5~2.1 / f=17.2~27.6mm
Keystone Correction +/- 30° horizontal, +/- 30° vertical  

Mechanical

Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 28dB (HIGH BRIGHT) / 25dB (OTHERS) / 19dB (ECO)
Regulations UL60950-1:2nd edition,2014, UL62368-1:2nd Edition, FDA, FCC Part15 Subpart B(ANSI C63.4:2014), Proposition65, TPCH, CAN/CSA C22.2 No.60950-1-07,2nd Edition,2014, ICES-003 Issue6(ANSI C63.4:2014)  

Lens Adjustment Functions

Manual focus, zoom, horizontal/vertical shift  

DMD Specifications

0.64" LCD w/ MLA  

Awards

ActiveScene wins 2021 Best Electronics Systems (BEST) Award
Photos & Slideshow View the slideshowView the slideshow View Slideshow The 2021 BEST Awards (Best Electronics Systems Technologies) from Commercial Integrator focus on letting the integrator audience know which AV products have stood out among the rest this year. This collection of outstanding AV products and services are impacting the commercial integration industry every day, and we seek to give each winner its due respect for helping to advance the industry. The 2021 BEST Awards selections were judged by an unbiased panel. Judging is done individually, with each judge giving a score for three separate categories for each audio video product.

Press

Sharp NEC Display Solutions Partners with Avery Dennison To Bring ActiveScene™ Complete Digital Display Solution to Market
Integrating Avery Dennison’s Vela™ Dynamic System with Sharp/NEC Projection, Installation and Management Expertise, ActiveScene is a Complete, Innovative Solution to Turn Underutilized Window Space into Engaging Promotional Displays

Media

Sharp/NEC Starts Formally Marketing Smart Window Film For Privacy, Digital Signage
The conjoined Sharp/NEC display company has started formally marketing the projection on switchable glass solution that the old NEC started showing at trade shows about three years ago.
Sharp NEC Display Solutions Start Formally Marketing Smart Window Film For Privacy, Digital Signage
The conjoined Sharp/NEC display company has started formally marketing the projection on switchable glass solution that the old NEC started showing at trade shows about three years ago.
Sharp NEC Display Solutions and Avery Dennison Debut ActiveScene System — Projection-Based Digital Signage on Glass
Sharp NEC Display Solutions today announced its partnership with Avery Dennison; delivering something called ActiveScene, which provides a comprehensive AV solution to transform existing windows into engaging signage displays.
Sharp NEC Display Solutions Partners with Avery Dennison on Digital Display
Integrating Avery Dennison’s Vela Dynamic System with Sharp/NEC Projection, Installation and Management Expertise, ActiveScene turns underutilized windows into engaging promotional displays
Sharp NEC Display Solutions Partners with Avery Dennison to Bring ActiveScene Complete Digital Display Solution to Market
On June 2, Sharp NEC Display Solutions announced its partnership with Avery Dennison, delivering an innovative, interactive AV solution, ActiveScene.
Sharp NEC Display Solutions Partners With Avery Dennison To Bring ActiveScene™ Complete Digital Display Solution to the Market
Sharp NEC Display Solutions, a global leader in the display market, today announced its partnership with Avery Dennison, delivering an innovative, interactive AV solution, ActiveScene™.
Sharp NEC Display Solutions Partners With Avery Dennison To Bring ActiveScene™ Complete Digital Display Solution to Market
Integrating Avery Dennison’s Vela™ Dynamic System with Sharp/NEC Projection, Installation and Management Expertise, ActiveScene is a Complete, Innovative Solution to Turn Underutilized Window Space into Engaging Promotional Displays.
Sharp/NEC Partners With Avery Dennison To Bring ActiveScene™ Complete Digital Display Solution to Market
Sharp NEC Display Solutions, a global leader in the display market, announced its partnership with Avery Dennison, delivering an innovative, interactive AV solution, ActiveScene™.
Sharp NEC Display, Avery Dennison partner on AV solution
Sharp NEC Display Solutions has teamed up with Avery Dennison on ActiveScene, an interactive AV solution.
AV News to Know June 4, 2021: New Products, Cool Projects and People in New Places
Sharp NEC Display Solutions this week announced its partnership with Avery Dennison, delivering an interactive AV solution, ActiveScene.
Sharp NEC Display Solutions, Avery Dennison Introduce ActiveScene Window Film
Sharp NEC Display Solutions (Chicago, IL) has partnered with Avery Dennison Graphics Solutions (Mentor, OH) to introduce ActiveScene, a film solution that helps turn existing windows into AV displays.
ProjectorCentral Announces Projection Expo 2021 Best of Show Awards
ProjectorCentral.com, host of Projection Expo 2021, a virtual trade event held on June 15-17 showcases the best new projectors from the industry's leading manufacturers. Sharp/NEC PA1004UL Laser Projector is one of them.
Announcing the 2021 Best Electronics Systems (BEST) Award Winners
The 2021 BEST Awards (Best Electronics Systems Technologies) focus on letting the integrator audience know which AV products have stood out among the rest this year. For venue Projectors, the winner is Sharp NEC Display Solutions.
Sharp NEC Display Solutions ActiveScene
This dynamic display signage projects a unique AV experience. Developed with Avery Dennison’s Vela smart window film, and can be retrofitted to any window or glass surface. Film becomes opaque upon electronic command to create a dynamic canvas for projection.
Announcing the 2021 Best Electronics Systems (BEST) Award Winners
The 2021 BEST Awards focus on letting the integrator audience know which AV products have stood out among the rest this year. For venue Projectors, the winner is Sharp NEC Display Solutions.
Sharp/NEC and Avery Dennison Team Up for New Digital Window Graphics
ActiveScene is a projection system from Sharp/NEC combined with an “active” window film from Avery Dennison that can turn any window into dynamic digital signage.

Warranty Length: Registered owners receive a 5-year or 20,000 hours parts and labor warranty including InstaCare next business day exchange.

  • NP-P605UL
  • Vela Film
  • Vela Controller
  • Media Player
  • Control Cables
  • Network Cables
  • HDMI Cable
  • PA600CM
  • Extension Column

Have a problem with your NEC product? Here you'll find common questions. If you do not find a sufficient answer, please do not hesitate to contact us or call us at 800-632-4662.

Projectors

  • If the lamp indicator light on the projector is solid red then you would need to change the lamp as it has been used beyond its usable life.
  • Once the new lamp is installed you will need to reset the lamp hours of the projector with the remote control.
  • While the unit is in standby mode, meaning the power light is solid orange, you will need to hold down the help button on the remote for 10 to 15 seconds.
  • Once the lamp hours are reset the lamp LED light will go out and at that time the unit should power on normally.
  • In the projectors on screen menu select the Setup option.
  • Under setup go to Installation or Installation 1 in the sub menu.
  • Within installation you will need to select Orientation.
  • In orientation select the box that says desktop front, press enter and change the option to either ceiling front or ceiling rear depending on which direction the unit is facing in regards to the screen.
This tip works for most NEC Projectors: First, ensure that the projector is powered “on.” Second, hold down the “cancel” or “exit” button on the projector for about 15 to 20 seconds.
You will need an additional accessory called a remote mouse receiver -Part Number NP01MR. 3 Ways to Order:
  • NEC Website
  • Contacting Projector Telephone Support at 800.836.0655.
NEC projector input panels feature RGB computer inputs, a composite video input (yellow RCa type plug) and an S-Video input. The RGB computer input (blue) and can also be used with an optional component video adapter for connection to a DVD player or other video source, if desired.
Function F* (this varies from computer to computer)
This can be done by going into the OSM and making the change there or by sending a specific RS232 command to the projector from a computer.
If you are experiencing an issues related to image quality, colors, and signal, Factory Reset is the first setup to perform. (Please make a note of any custom setting prior to doing a factory reset.)
With certain NEC projectors it is possible to project onto non-flat surfaces such as cylinders or corners using free software such as the Geometric Correction Tool, Keep in mind that the 16:9 format will not be supported.
To permanently save your digital keystone corrections by activating "3D Reform Memory." To do this:

1. Go to the "Extended Menu" and choose "Projector Options."
2. Choose "Setup" and go to page 4.
3. Choose the checkbox "3D Reform Memory" and press OK.

Your horizontal, vertical and diagonal 3D reform (keystone) data will now be permanently saved.
The flash memory card or USB drive must be formatted with the FAT16 or FAT file system. (FAT32 and NTFS are not recognized.)
The PC card slot, which is situated on the projector main unit, allows you to make presentations without a PC. Just insert a compact flash or flash memory card containing your stored presentation material and display images directly onto a screen. The projector will display JPEG, BMP, TXT and text-only HTML files.
To present your digital images or stills using an NEC projector you can use the following memory cards:

Compact flash cards (with a Type II PCMCIa CF adapter)
Smart media (with a 4-in-1 Type II adapter)
Memory stick (with a 4-in-1 Type II adapter)
Memory stick pro (with a 4-in-1 Type II adapter)
Multimedia card (with a 4-in-1 Type II adapter)
Secure digital (with a 4-in-1 Type II adapter)
The PC Card Viewer and the Blackboard Function. Projectors equipped with the PC Card Viewer feature are particularly suitable for mobile use since you do not need a notebook or PC to make a presentation. Instead, you can take your presentation along with you stored on a normal PC card or Compact Flash card. Meanwhile, the Blackboard feature allows you to create drawings via the USB mouse and project them onto a screen, facilitating interactive presentations and audience rapport.
Yes. NEC projectors are fitted with inputs for video and S-Video, and meet NTSC, PAL, SECAM, 4.43NTSC and PaL60 standards. You can connect the projector using video, S-video and component (YUV) cables. Please, all projectors are PaL Progressive-enabled (via YUV or RGB). The latest NEC projectors produce virtually no irritating fan noise.
Most projectors use LCD technology. This splits light into the primary colors red, green and blue. Each color is then directed through an LCD display acting as a ‘light valve’ and the light is then reassembled. There is an LCD display for each individual pixel and each primary color. DLP technology involves the use of huge numbers of tiny quadratic mirrors arrayed on a Texas Instruments DMD chip. Only when a mirror is tilted will it reflect the light shining onto it back towards the screen. This very high-frequency switching on and off of points of light is not perceived by the human eye and allows different shades of color to be portrayed. The colors are generated by a color ribbon featuring the primary colors red, green and blue.
It depends on the installation environment. In environments with more ambient light, we recommend choosing DLP. For the greatest flexibility, choose an NEC projector that features both technologies.
Check your projector's installation guide, or use our Image Calculator.

Keep in mind that distances shown in the Installation Guide or Image Calculator may vary ± 5%. We recommend that you verify the distance before the projector is installed.
As a general rule, the distance between the viewers and the screen should between 1.5 and 6 times the image width.
Your ideal screen will depend on your installation, the size of the room, the amount of ambient light, and other factors. We recommend contacting your installer or a screen vendor for screen recommendations.
Most lamps have an expected life of about 2000 hours.
There are several things you can do to increase your lamp life. • Always make sure there is adequate clearance near the intake and exhaust vents. • Keep the environment clean and relatively dust free. • Clean air filters every 100 hours, or more often if there are a lot of dust or contaminants in the room. • Striking the lamp ages the lamp as it causes slight changes to the shape of the electrodes that light the lamp, so light up your projector when you're ready to use it and avoid frequent on and off cycles. • Avoid shock to the lamp or projector. • Use Eco-Mode, if your projector has it. • After you run the projector, leave it plugged in until the fan turns itself off. • Avoid storing the lamp or projector in extreme temperatures or humidity levels.
Certain projector lamps contain mercury. Some states have laws that require projector lamps to be disposed of as a hazardous material if they contain mercury. Check with your audio-visual sales associate or local municipality to find out what the projector lamp disposal laws are for your state. You may also contact NEC Technical Support to have your lamp recycled by Sharp NEC Display Solutions.
For Windows XP (ver. 2.08):

LT265 & LT245 (Firmware Version: 1.04 or later) / WT610 (Firmware Version: 1.08 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Windows Vista (ver. 2.08):

LT265 / 245 (Firmware Version: 1.04 or later) / WT615 / 610 (Firmware Version: 1.08 or later) / LT380 / 280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Mac OS (Intel) (ver. 1.2.5)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

For Mac OS (PowerPC) (ver. 1.2.4)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

*The "Easy Connection" function cannot be used with VT800.
Virtual Remote Tool is compatible with NP300/400/500/500W/600 models.
PC Control is designed to control a single projector, while PC Control Pro is designed to control multiple projectors.
The PC Control Utility or PC Control Pro can be connected from your computer to the projector using a serial or LAN connection.
Select "Lamp Mode" on the remote control and use the menu to select Eco-Mode.
Excessive moisture, dust, heat and smoke.
You're seeing the result of dust build-up on the green LCD panel. We recommend that you schedule a service visit. Please contact NEC technical support or your local NEC service provider to set it up.
No, NEC only provides service support and parts to NEC authorized servicers and technicians. NEC-authorized service centers/technicians have attended training classes to ensure quality service on NEC products
Contact Sales Contact Support